Silicone self adhesive seal, clear colour, 6 m
Stormguard Clear self adhesive silicone draught excluder 6m Clear
Why Draught Proof
Your house or commercial property will loose heat during cold weather partly due to poor thermal insulation, but also due to the air-leakiness of the building. This warm air loss is technically known as infiltration or permeability and is measured in metres cubed per hour per square metre of floor area. A typical building built 1900 to 1990 will loose around 20-30 metres cubed of air per hour per square meter of floor area. This is due to natural leakage through the fabric of the building, but largely through gaps around windows and doors. Good use of draft proofing could reduce your air permeability to around 8-10 metres cubed per hour which is a good low cost way of reducing your heating bills. The amount of air infiltration to your property will also depend on its exposure to wind so if you are on a hillside or near the coast then it is even more beneficial for you have good draught proofing.
Self adhesive high-performance silicon strip
suitable for gaps of 2 to 7 mm
6 m roll, enough for one door or one window
four year manufacturers guarantee
excellent alternative to white/brown/black coloured window or door seals as this product is transparent and not readily as visible.