100w Mono Solar Panel Kit With Victron Energy PWM Charge Controller – Black Brackets

Description

Solar Kit Contents:

• 1 x 100w Mono Solar Panel by Lowenergie™
• 10A PWM Charge Controller by Victron Energy™
• Solar PV to controller cable
• Battery to solar controller cable
• 4 Black ABS Corner mounting brackets
• 1 Black Twin cable entry
• 1 Tube Sikaflex

Technical Specifications

100 Watt Solar Panel – (with 1m Cable & Solar Connector Plugs)

• Monocrystalline solar cells
• Max Power: 100w
• Max Power Voltage: 18.0v
• Max Current: 5.56A
• Open Circuit Voltage: 22.54v
• Short Circuit Current: 5.94A
• Weight: 6.9kg
• Size: 1200 x 540 x 30mm
• Maximum System Voltage: DC1000v
• Power Tolerance: ±3%

Technical – Victron Energy BlueSolar PWM-LCD & USB

• Battery Voltage 12/24 V
• Rated charge current 10A
• Automatic load disconnect Yes
• Maximum solar voltage 28V / 55V
• Self-consumption < 10 mA
• Load output Manual control + low voltage disconnect +timer
• Protection: Battery reverse polarity (fuse) Output short circuit Over temperature & Overload protection
• Shut down after 60 s in case of 130% load
• Shut down after 5 s in case of 160% load
• Short circuit: immediate shut down
• Grounding Common positive
• Operating temp. range -35 to +60°C (full load)
• Humidity (non-condensing) Max 95%

Battery

• Charge voltage ‘absorption’ Factory setting: 14,4V / 28,8V
• Charge voltage ‘float’ (2) Factory setting: 13,7V / 27,4V
• Low voltage load disconnect Factory setting: 11,2V / 22,4V
• Low voltage load reconnect Factory setting: 12,6V / 25,2V

USB

• Voltage 5V
• Current 2A (total from 2 outputs)

Enclosure

• Protection class IP20
• Terminal size 6 mm² / AWG10
• Weight 0,15kg
• Dimensions (h x w x d) 96 x 169 x 36 mm
• Liquid Crystal Display
• Two 5 Volt USB outputs
• Lighting control function, fully programmable
• Three stage battery charging (bulk, absorption, float), fully programmable
• Load output with low voltage and manual disconnect (programmable)
• Load output protected against over load and short circuit
• Protected against reverse polarity connection of the solar panels and/or battery

1) For 12V use 36 cell solar panels , For 24V use 72 cell solar panels or 2x 36 cell in series

2) The controller switches to the lower float voltage level 2 hours after the absorption voltage has been reached. Whenever the battery voltage becomes lower than 13V, a new charge cycle is triggered.

Victron Energy are a Dutch company who lead in the field of off-grid solar products.

Solar Panel to Controller Cable

5m Twin core 2.5mm2 cable with male and female connectors to one end.

Solar controller to Battery Cable

1.5m, 2 Core 2.5mm2 AMC round profile cable, in-line fuse, 30A spade fuse M8 ring terminals.

All cabling carefully design to minimise voltage drops and maintain maximum system efficiency. TUV Approved

Solar Brackets:

• ABS
• 4 Corners
• Black
• Size per bracket 15 x 15 x 6.5cm.
• Weight (4 brackets) 1.6kg
• Easy Installation, holes should be drilled in each bracket, and corresponding holes in the solar panel frame on each side; then brackets should be fixed to the solar panel using self-tapping screws (not included).

Cable Entry

• ABS
• Twin cable entry for 4-12mm cables
• Black
• Watertight
• Size: 12 x 10 x 5cm

Product Warranties

Solar Panel = 10 Year for materials and workmanship

Charge Controller = 5 Year Victron Energy

All other components have a 12 month warranty.

Power Output Warranty is at least 90% maximum power for first 10 years of use and;

Power Output Warranty of at least 80% maximum power output for up to 25 years use