This 16A manual thermostat is perfect for electric water heating systems as well as underfloor heating with floor or air sensor.
These thermostats will acquire the room temperature with its air or floor sensor, and the heating contact will close when the room temperature falls below the selected set point.
Thermostats are used for the control of warm-water (floor) heating systems and direct electric heating systems used in Commercial buildings, Residential buildings and light industrial buildings. Ideal for intermittent use.
These thermostats work particularly well in mild weather where heating is often not fully required.
Technical Information
- LED indicator is light when heating is on
- With manual switch and knob for easy operation
- On/off control output for heating device
Voltage | AC 230V |
Power Consumption | 5W |
Floor Sensor | Rubber-thermoplastic NTC sensor included, cable length is 3m |
Max Switch Rating | 16A (3.6KW) but is good practice to restrict load to 10-12A (2-2.4KW) |
Switching Differential | 0.5k |
Setting Range | 4 C – 45 C |
Ambient Temperature | 5 – 50 C |
Protective Housing | IP20 |
Housing Material | Self-extinguishing PC |
Dimensions | 86 x 86mm, will fit into a standard single switch back box 35mm deep. |
Warranty | CE Certification with 1 Year |
See how you can save extra money by visiting our interactive energy saving house here
Reviews
There are no reviews yet.