200w Mono Solar Panel Kit With Victron Smart Charge Controller, Brackets and Sikaflex

2 x 100w Mono solar panel with Victron Energy™ smart charge controller, mountings, cables and adhesive


5 in stock


Solar Kit Contents:

  • 2 x 100w Mono Solar Panel by Lowenergie™
  • 1 x 20A 100/20 MPPT Smart Charge Controller by Victron Energy
  • 1 x Solar PV to controller cable
  • 1 x Battery to solar controller cable
  • 8 x White ABS Corner mounting brackets
  • 1 x Twin cable entry
  • 1 x Tube Sikaflex

Technical Specifications

100 Watt Solar Panel – (with 1m Cable & Solar Connector Plugs)

  • Max Power: 100w
  • Max Power Voltage: 18.0v
  • Max Current: 5.50A
  • Open Circuit Voltage: 21.60v
  • Short Circuit Current: 6.05A
  • Weight: 7.8kg
  • Size: 1060 x 540 x 30mm
  • Power Tolerance: ±3%
  • Maximum System Voltage: DC1000v

OUR NEW 9BB 100w Monocrystalline Solar Panels. These are our highest efficiency yet which now allows these panels to be slightly smaller and still generate the same power! 9BB means 9 silver conductor strips connect each row of silicone cells, which means higher efficiency in pulling every bit of power from all of the cells. The overall panel efficiency is now up from 18% to 21.2%.

Technical – Victron MPPT Smart 100/20

Controller Specification:

  • Dimensions: 100 x 113 x 60mm
  • Weight: 650g
  • Rated charging & load current: 20 Amps
  • Maximum voltage input: 28V/55V
  • Rated Voltage: 12V & 24V
  • Protected against reverse polarity connection of the solar array and/or battery.

Solar Panels to Controller Cable

  • 10m 4mm2 cable with male and female connectors to one end.

Solar controller to Battery Cable

  • 1.5m, 4mm2 round profile cable, in-line fuse, 30A spade fuse M8 ring terminals.

Solar Brackets:

  • ABS
  • 4 Corners 
  • White
  • Size per bracket 15x15x 6.5cm.
  • Weight (4 brackets) 1.6kg 
  • Easy Installation, holes should be drilled in each bracket, and corresponding holes in the solar panel frame on each side; then brackets should be fixed to the solar panel using self-tapping screws (not included).

Cable Entry

  • ABS
  • Twin cable entry for 4-12mm cables
  • White
  • Watertight
  • Size: 12x10x5cm

All cabling carefully design to minimise voltage drops and maintain maximum system efficiency. TUV Approved

Product Warranties

  • Solar Panel = 10 Year for materials and workmanship
  • Charge Controller = 5 Year Victron Energy
  • All other components have a 12 month warranty

Additional information

Weight25 kg
Dimensions100 × 68 × 3 cm


There are no reviews yet.

Be the first to review “200w Mono Solar Panel Kit With Victron Smart Charge Controller, Brackets and Sikaflex”

You were not leaving your cart just like that, right?

Enter your details below to save your shopping cart for later. And, who knows, maybe we will even send you a sweet discount code :)

    Your Cart
    Your cart is emptyReturn to Shop