Solar Kit Contents:
- 2 x 150w Mono Solar Panel by Lowenergie
- 1 x 30A 100/30 MPPT Smart Charge Controller by Victron Energy
- 1 x Victron 712 Black Smart Battery Monitor
- 1 x Solar PV to controller cable
- 1 x Battery to solar controller cable
- 8 x White ABS Corner mounting brackets
- 4 x Side brackets
- 1 x Twin cable entry
- 1 x Tube Sikaflex
Technical Specifications
150 Watt Solar Panel (with 1m Cable & Solar Connector Plugs)
- Maximum Power (Pmax): 150W
- Maximum Power Voltage (VMP): 18.0V
- Maximum Power Current (IMP): 8.34A
- Open Circuit Voltage (VOC): 22.54V
- Short Circuit Current (ISC): 8.98A
- Weight: 10.6KG
- Size: 1480*680*35mm
- Power Tolerance: +/-3%
- Maximum System Voltage: DC1000V
Technical – Victron MPPT Smart 100/30
Controller Specification:
- Dimensions: 130 x 186 x 70 mm
- Weight: 1300g
- Rated charging & load current: 30 Amps
- Maximum voltage input: 28V/55V
- Rated Voltage: 12V & 24V
- Protected against reverse polarity connection of the solar array and/or battery..
Solar Corner Brackets:
- ABS
- 4 Corners
- White
- Size per bracket 15x15x 6.5cm.
- Weight (4 brackets) 1.6kg
Easy Installation, holes should be drilled in each bracket, and corresponding holes in the solar panel frame on each side; then brackets should be fixed to the solar panel using self-tapping screws (not included).
- ABS
- White
- Size (1 bracket): 18 x 9 x 6.5 cm
- Weight: (2 brackets): 1.0 kg
Cable Entry
- ABS
- Twin cable entry for 4-12mm cables
- White
- Watertight
- Size: 12x10x5cm
All cabling carefully design to minimise voltage drops and maintain maximum system efficiency. TUV Approved
Battery Monitor BMV-712 Smart
- Supply voltage range 6,5 – 70 VDC
- Current draw, back light off < 1mA
- Input voltage range, auxiliary battery 6,5 – 70 VDC
- Battery capacity (Ah) 1 – 9999 Ah
- Operating temperature range -40 +50°C (-40 – 120°F)
- Measures voltage of second battery, or temperature, or midpoint Yes
- Temperature measurement range -20 +50°C
- VE.Direct communication port Yes
- Bistable relay 60V / 1A normally open (function can be inverted)
Resolution & Accuracy (with a 500 A shunt)
- Current ± 0,01A
- Voltage ± 0,01V
- Amp hours ± 0,1 Ah
- State of charge (0 – 100%) ± 0,1%
- Time to go ± 1 min
- Temperature (0 – 50°C or 30 – 120°F) ± 1°C/°F
- Accuracy of current measurement ± 0,4%
- Accuracy of voltage measurement ± 0,3%
Installation & Dimensions
- Installation Flush mount
- Front 63mm diameter
- Front bezel 69 x 69mm (2.7 x 2.7 inch)
- Body diameter and depth 52mm (2.0 inch) and 31mm (1.2 inch)
- Protection category IP55 (not intended for outdoor use)
Standards
- Safety EN 60335-1
- Emission / Immunity EN 55014-1 / EN 55014-2
- Automotive ECE R10-4 / EN 50498
Accessories
- Shunt (included) 500A / 50mV
- Cables (included) 10 meter 6 core UTP with RJ12 connectors
- Models: Bluetooth built-in
Product Warranties
Solar Panel = 10 Year for materials and workmanship
Charge Controller = 5 Year Victron Energy
All other components have a 12 month warranty.
Reviews
There are no reviews yet.