Solar Kit Contents:
- 2 x 150w Mono Solar Panel by Lowenergie
- 1 x 30A 100/30 MPPT Smart Charge Controller by Victron Energy
- 1 x Solar PV to controller cable
- 1 x Battery to solar controller cable
- 8 x White ABS Corner mounting brackets
- 4 x Side brackets
- 1 x Twin cable entry
- 1 x Tube Sikaflex
150 Watt Solar Panel (with 1m Cable & Solar Connector Plugs)
- Maximum Power (Pmax): 150W
- Maximum Power Voltage (VMP): 18.0V
- Maximum Power Current (IMP): 8.34A
- Open Circuit Voltage (VOC): 22.54V
- Short Circuit Current (ISC): 8.98A
- Weight: 10.6KG
- Size: 1480*680*35mm
- Power Tolerance: +/-3%
- Maximum System Voltage: DC1000V
Technical – Victron MPPT Smart 100/30
- Dimensions: 130 x 186 x 70 mm
- Weight: 1300g
- Rated charging & load current: 30 Amps
- Maximum voltage input: 28V/55V
- Rated Voltage: 12V & 24V
- Protected against reverse polarity connection of the solar array and/or battery.
Solar Panels to Controller Cable
- 10m 4mm2 cable with male and female connectors to one end.
Solar controller to Battery Cable
- 1.5m, 4mm2 round profile cable, in-line fuse, 30A spade fuse M8 ring terminals.
- 4 Corners
- Size per bracket 15x15x 6.5cm.
- Weight (4 brackets) 1.6kg
- Easy Installation, holes should be drilled in each bracket, and corresponding holes in the solar panel frame on each side; then brackets should be fixed to the solar panel using self-tapping screws (not included).
- Material: Plastic
- Colour: White
- Size (1 bracket): 18 x 9 x 6.5 cm
- Weight: (2 brackets): 1.0 kg
- Twin cable entry for 4-12mm cables
- Size: 12x10x5cm
All cabling carefully design to minimise voltage drops and maintain maximum system efficiency. TUV Approved
Solar Panel = 10 Year for materials and workmanship
Charge Controller = 5 Year Victron Energy
All other components have a 12 month warranty.