300w Mono Solar Panel Kit With 30A Victron Smart Charge Controller, Inverter, Isolator Switch, Battery and Mounting Brackets

300w Mono solar panel with Victron Energy™ smart charge controller, two batteries, inverter, isolator cables and mounting brackets

£1,089.99

1 in stock

Description

Solar Kit Contents:

  • 2 x 150w Mono Solar Panel by Lowenergie™
  • 1 x 30A Smart Charge Controller by Victron Energy™
  • 1 x Solar PV to controller cable
  • 1 x Victron Energy™ Phoenix inverter 
  • 1 x Victron Energy™ isolator switch
  • 1 x Battery
  • 1 x Battery to solar controller cable
  • 8 x White ABS Corner mounting brackets
  • 4 x Side brackets
  • 1 x Twin cable entry
  • 1 x Tube Sikaflex

Technical Specifications

150 Watt Solar Panel (with 1m Cable & Solar Connector Plugs)

  • Maximum Power (Pmax): 150W
  • Maximum Power Voltage (VMP): 18.0V
  • Maximum Power Current (IMP): 8.34A
  • Open Circuit Voltage (VOC): 22.54V
  • Short Circuit Current (ISC): 8.98A
  • Weight: 10.6KG
  • Size: 1480*680*35mm
  • Power Tolerance: +/-3%
  • Maximum System Voltage: DC1000V
Victron 12/500 Inverter
  • 12 Volt input
  • 230V AC output
  • Continuous power at 25°C 500VA (approx. 400w)
  • Peak power 900W for a short time,
  • Input voltage range 9.2 – 17v,
  • DC low shut down (adjustable) 9.3v,
  • Battery charged detect (adjustable) 14,0v,
  • Max. efficiency 90%.
  • Zero-load power 6w,
  • Default zero-load power in ECO mode,
  • Operating temperature range -40 to +65°C (fan assisted cooling),
  • Humidity (non-condensing) max 95%,
  • Max. cable size 10 mm² / AWG8,
  • Standard AC outlets UK (BS 1363),
  • Protection category IP 21,
  • Weight 3,9kg,
  • Dimensions (hxwxd, mm)
  • 86 x 172 x 275

SmartSolar Charge Controller MPPT 100/30 

  • Battery voltage 12/24V Auto Select
  • Rated charge current 30A
  • Nominal PV power, 12V 1a,b) 440W
  • Nominal PV power, 24V 1a,b) 880W
  • Maximum PV open circuit voltage 100V
  • Max. PV short circuit current 2) 35A
  • Maximum efficiency 98%
  • Self-consumption 12V: 30 mA 24V: 20 mA
  • Charge voltage ‘absorption’ Default setting: 14,4V / 28,8V (adjustable)
  • Charge voltage ‘float’ Default setting: 13,8V / 27,6V (adjustable)
  • Charge algorithm multi-stage adaptive
  • Temperature compensation -16 mV / °C resp. -32 mV / °C
  • Protection
  • PV reverse polarity
  • Output short circuit
  • Over temperature
  • Operating temperature -30 to +60°C (full rated output up to 40°C)
  • Humidity 95%, non-condensing
  • Data communication port VE.DirectENCLOSURE
  • Colour Blue (RAL 5012)
  • Power terminals 16 mm² / AWG6
  • Protection category IP43 (electronic components), IP22 (connection area)
  • Weight 1,3 kg
  • Dimensions (h x w x d) 130 x 186 x 70 mm

STANDARDS

  • Safety EN/IEC 62109-1, UL 1741, CSA C22.2

1a) If more PV power is connected, the controller will limit input power.
1b) The PV voltage must exceed Vbat + 5V for the controller to start.
Thereafter the minimum PV voltage is Vbat + 1V.
2) A PV array with a higher short circuit current may damage the controller

Battery

Enduroline AGM 95Ah With class-leading Calcium+® technology these Advanced Glass Matt powerhouses are built to endure the toughest leisure conditions.

  • 12 Volts
  • AGM Capacity (C20)
  • 95 Ah
  • Length 354 mm Width 175 mm Height inc. terms 190 mm

Solar Corner Brackets:

  • ABS
  • 4 Corners
  • White
  • Size per bracket 15x15x 6.5cm.
  • Weight (4 brackets) 1.6kg 

Easy Installation, holes should be drilled in each bracket, and corresponding holes in the solar panel frame on each side; then brackets should be fixed to the solar panel using self-tapping screws (not included).

Solar Side Brackets:
  • ABS
  • White
  • Size (1 bracket): 18 x 9 x 6.5 cm
  • Weight: (2 brackets): 1.0 kg

Cable Entry

  • ABS
  • Twin cable entry for 4-12mm cables
  • White
  • Watertight
  • Size: 12x10x5cm

All cabling carefully design to minimise voltage drops and maintain maximum system efficiency. TUV Approved 

Product Warranties

Solar Panel = 10 Year for materials and workmanship

Charge Controller = 5 Year Victron Energy

All other components have a 12 month warranty.

Additional information

Weight30 kg
Dimensions100 × 68 × 3 cm
Manufacturer

Reviews

There are no reviews yet.

Be the first to review “300w Mono Solar Panel Kit With 30A Victron Smart Charge Controller, Inverter, Isolator Switch, Battery and Mounting Brackets”

You were not leaving your cart just like that, right?

Enter your details below to save your shopping cart for later. And, who knows, maybe we will even send you a sweet discount code :)

0
    0
    Your Cart
    Your cart is emptyReturn to Shop