450w Mono Solar Panel Kit With 35A Victron Smart Charge Controller and Mounting Brackets

• Battery voltage 12 / 24 / 48V Auto Select (software tool needed to select 36V)
• Rated charge current 35A
• Nominal PV power 1a, b) 12V: 500W / 24V: 1000W / 36V: 1500W / 48V: 2000W
• Max. PV short circuit current 2) 40A
• Maximum PV open circuit voltage 150V absolute maximum coldest conditions
• 145V start-up and operating maximum
• Maximum efficiency 98%
• Self-consumption 12V: 20mA 24V: 15mA 48V: 10mA
• Charge voltage ‘absorption’ Default setting: 14,4 / 28,8 / 43,2 / 57,6V (adjustable)
• Charge voltage ‘float’ Default setting: 13,8 / 27,6 / 41,4 / 55,2V (adjustable)
• Charge algorithm multi-stage adaptive (eight pre-programmed algorithms)
• Temperature compensation -16 mV / -32 mV / -64 mV / °C
• Protection
• PV reverse polarity
• Output short circuit
• Over-temperature
• Operating temperature -30 to +60°C (full rated output up to 40°C)
• Humidity 95%, non-condensing
• Data communication port VE.Direct

ENCLOSURE

• Colour Blue (RAL 5012)
• Power terminals 16 mm² / AWG6
• Protection category IP43 (electronic components), IP22 (connection area)
  Weight 1,25 kg
• Dimensions (h x w x d) 130 x 186 x 70 mm

STANDARDS

• Safety EN/IEC 62109-1, UL 1741, CSA C22.2

1a) If more PV power is connected, the controller will limit input power.
1b) The PV voltage must exceed Vbat + 5V for the controller to start.
Thereafter the minimum PV voltage is Vbat + 1V.
2) A PV array with a higher short circuit current may damage the controller.