Garage Door Bottom Brush Draught Excluder – available in white, brown or silver/aluminium.
Your house or commercial property will lose heat during cold weather partly due to poor thermal insulation, but also due to air infiltration or the permeability of the building. Infiltration or permeability is measured in meters cubed per hour per square meter of floor area. A typical building built 1900 to 1990 will lose around 20-30 meter cubed of air per hour per square meter of floor area due to poor draught proofing. This is due to natural leakage through the fabric of the building, but largely through gaps around windows and doors. Good use of draft proofing could reduce your air permeability to around 10-15 meters cubed per hour which is a good low cost way of reducing you heating bills.
Advantages of Draught Proofing – As a rough guide, fitting draught proofing can reduce your heating bill by 8-10/year per window or door.
- PVC Brush seal/sweep seal
- Garage door draught brush is 2134mm wide (supplied in 2x1067mm pieces)
- Simple fit, supplied with screws, easy to cut to length
- Used for draught proofing and helps to reduce heating bills, also helps sound proofing your property from external noise.
- Brush sweep now available in either 25mm or 50mm depth in Aluminium.