Mono 100W Solar Panel Kit 4 MPPT Charge Controller

100w Mono-Crystalline Solar Kit 4 with MPPT Charge Controller

£114.99

62 in stock

Description

Solar Kit Contents:

  • 100w Mono solar panel
  • 10A MPPT Charge Controller
  • Solar power to controller cable with MC4 connectors – 2 core 5M 2.5mm2 cable
  • 1.5 Metre Controller to Battery Cable, 4mm2 single core cable, with 30A inline fuse and 8mm ring connectors
  • Battery Terminals (pair)
  • 4 aluminium mounting brackets

Technical Specifications – 100w Solar Panel

Half cut solar cells

Benefits of half cut solar cells compared to full solar cells. Full silicon solar cells used to be square, sometimes with the corners cut off, but now the mainstream trend with all the big solar manufacturers is for half cut, small rectangular silicone cells, due to their higher efficiency.

Solar panel technology has moved on considerably in the last few years with the introduction of half cut solar cells which can provide 2 to 3% more efficiency and higher watts per square metre. This means that the same power solar panels used in the past can now be smaller. Alternatively, you can have bigger solar panels with much higher power output, but don’t take up as much space.
This works by doubling the number of solar cells and increasing the number of ribbons, buzz bars which connect the silicon solar cells together within the panel. This helps to lower resistance in the panel, which in turn reduces tiny voltage drops in the many panel connections to overall provide more power output. The smaller cells are also less likely to have microfracture issues and show improved cloudy day performance.

  • Maximum Power (Pmax): 100W
  • Maximum Power Voltage (VMP): 18V
  • Maximum Power Current (IMP): 5.50A
  • Open Circuit Voltage (VOC): 21.60V
  • Short Circuit Current (ISC): 6.05A
  • Weight: 7.8KG
  • Size: 1060 x 540 x 30mm
  • Cells: 36
  • Power Tolerance: +/-3%
  • Maximum System Voltage: DC1000V

Tracer AN Series 1210AN

  • Battery Input Voltage Range 8V ~ 32V
  • Nominal System Voltage 12/24V Auto
  • Battery Input Voltage Range 8V ~ 32V
  • Max Charge/ Discharge Current 10A
  • Max. PV Open Circuit Voltage 100V (At minimum operating environment temperature)
  • Max. PV Open Circuit Voltage 92V (At 25 Deg C operating environment temperature)
  • MPPT Voltage Range +2V ~ 72V
  • Max Rated Charging Power (10A), 130W (12V), 260W (24V)
  • Max. PV Array Input Power 390W (12V), 780W (24V)
  • Wiring Connections, Solar +/-, Battery +/-, Power Output +/-, Temp Sensor, COM RJ45
  • Working Environment Temperature Range – 25 to +45 Deg C
  • Humidity Range <95%
  • Enclosure IP30
  • Dimensions 172mm x 139mm x 44mm
  • Power Terminals 12AWH (4mm sq)
  • Weight 0.6Kg

Solar Panels to Controller Cable

  • 2-core 2.5mm2, 5M long cable

Solar controller to Battery Cable

  • 2 X 1.5m single core 4mm2 solar PV Cable, with 30A inline fuse and 8mm ring terminals TUV Approved.

All cabling carefully design to minimise voltage drops and maintain maximum system efficiency

Solar Brackets:

  • Aluminium
  • Light weight
  • 100mm long
  • Supplied as 4 brackets per panel

Important information regarding Charge Controllers – MPPT 

Warning: The Connection Order Below must be followed

1, Battery Cable, 2 Load Cable, 3, Solar Panel Cable

Do not install the charge controller in a sealed enclosure where battery gases can accumulate.

Tracer AN Series product features:

  • Advanced maximum Power point tracking (MPPT) technology, with efficiency no less than 99.5% with 10-30% more power to the battery than cheaper PWM controllers.
  • High quality components with maximum conversion efficiency of 98%
  • Ultra fast tracking speed and guaranteed tracking efficiency
  • Reliable automatic limit function of maximum PV input power, ensuring no overload risk.
  • Wide maximum PowerPoint operating voltage range
  • 12/24V DC automatic battery detection
  • LCD panel display providing operating data and working conditions
  • Supports 3 pre-programmed charging options, sealed, gel and flooded batteries
  • Battery temperature compensation function
  • Includes RS-485 communication bus interface and mod bus communication protocol
  • RS-485 plug socket port can be used for PC monitoring via USB connection, this socket can also be used for connecting the MT50 external display unit to show real-time data and parameter settings.
  • Remote temperature sensor connection port, to remotely detect battery temperature allowing and MPPT technology to adjust parameters.
  • The controller has a three stage battery charging algorithm (bulk charging, constant charging and flow charging) for rapid, efficient and safe battery charging.

Product Warranties

Solar Panel = 10 Year Warranty for materials and workmanship.

Power Output Warranty is at least 90% maximum power for first 10 years of use and;

Power Output Warranty of at least 80% maximum power output for up to 25 years use.

All other components = 1 Year warranty.

Additional information

Weight15 kg
Manufacturer

Reviews

There are no reviews yet.

Be the first to review “Mono 100W Solar Panel Kit 4 MPPT Charge Controller”

You may also like…

You were not leaving your cart just like that, right?

Enter your details below to save your shopping cart for later. And, who knows, maybe we will even send you a sweet discount code :)

0
    0
    Your Cart
    Your cart is emptyReturn to Shop