Victron Bluesolar MPPT Charge Controller 75/10

£69.99

Superior 10A MPPT Charge Controller constantly monitoring the voltage and current output of your solar (PV) panels

2 in stock

EAN: 8719076025306 SKU: 1167 Category:

A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, BlueSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. BlueSolar maintains battery health, extending its life.

MPPT: Ultra Fast Maximum Power Point Tracking

By constantly monitoring the voltage and current output of your solar (PV) panels, MPPT technology ensures that every drop of available power is rinsed out of your panels, and harvested for storage. The advantage of this is most noticeable when the sky is partially clouded, and light intensity is constantly changing.

Remote Monitoring and Control

Remotely control and monitor the extensive features of your BlueSolar MPPT charger by attaching a bluetooth dongle and pairing it with your smartphone or other device via VictronConnect. If your installation is connected to the internet Victron Remote Management Portal (VRM) provides access to the full power of your MPPT, anytime, anywhere; both services are free to use. For remote installations – even when there is no internet connection or phone signal nearby – you may be able to monitor your MPPT by bluetooth-pairing with a LoRaWAN (long-range wide area network) device, available optionally.

Load output

The intelligent Load output function prevents damage caused by running batteries ‘flat’. You can configure the voltage at which BlueSolar disconnects a load – thereby preventing excessive drain on your batteries. And here’s the clever bit: BlueSolar will attempt a 100% recharge every day. If it can’t – during periods of poor weather – it raises the disconnect voltage, daily, until it achieves success. We call this feature BatteryLife because it maintains the health, and extends the life of your battery.

Specifications

  • BlueSolar Charge Controller MPPT 75/10
  • Battery voltage (auto select) 12/24V
  • Rated charge current 10A
  • Nominal PV power, 12V 1a,b) 145W
  • Nominal PV power, 24V 1a,b) 290W
  • Max. PV short circuit current 2) 13A
  • Automatic load disconnect Yes
  • Max. PV open circuit voltage 75V 100V
  • Peak efficiency 98%
  • Self-consumption 12V: 25 mA 24V: 15 mA
  • Charge voltage ‘absorption’ 14,4V / 28,8V (adjustable)
  • Charge voltage ‘float’ 13,8V / 27,6V (adjustable)
  • Charge algorithm multi-stage adaptive
  • Temperature compensation -16 mV / °C resp. -32 mV / °C
  • Max. continuous load current 15A
  • Low voltage load disconnect 11,1V / 22,2V / 44,4V or 11,8V / 23,6V / 47,2V or Battery Life algorithm
  • Low voltage load reconnect 13,1V / 26,2V / 52,4V or 14V / 28V / 56V or Battery Life algorithm
  • Protection Output short circuit / Over temperature
  • Operating temperature -30 to +60°C (full rated output up to 40°C)
  • Humidity 95%, non-condensing
  • Data communication port VE.Direct

Enclosure

  • Colour Blue (RAL 5012)
  • Power terminals 6 mm² / AWG10
  • Protection category IP43 (electronic components), IP22 (connection area)
  • Weight 0,5 kg
  • Dimensions (h x w x d) 100 x 113 x 40 mm

Standards

  • Safety EN/IEC 62109-1, UL 1741, CSA C22.2

1a) If more PV power is connected, the controller will limit input power.
1b) The PV voltage must exceed Vbat + 5V for the controller to start.
Thereafter the minimum PV voltage is Vbat + 1V
2) A PV array with a higher short circuit current may damage the controller.

Specification Sheet

Data Sheet

Installation videos

Weight.50 kg

Reviews

There are no reviews yet.

Be the first to review “Victron Bluesolar MPPT Charge Controller 75/10”