Victron Bluesolar PWM Charge Controller 12/24v 30A LCD Screen & USB Ports

£58.79

30A PWM Charge Controller with Liquid Crystal Display, 2 x 5 Volt USB outputs fully programmable, easy to use and superior quality

2 in stock

EAN: 8719076046226 SKU: 1165 Category:

BlueSolar PWM-LCD & USB 

  • Liquid Crystal Display
  • Two 5 Volt USB outputs
  • Lighting control function, fully programmable
  • Three stage battery charging (bulk, absorption, float), fully programmable
  • Load output with low voltage and manual disconnect (programmable)
  • Load output protected against over load and short circuit
  • Protected against reverse polarity connection of the solar panels and/or battery

Technical Specification

  • Charge Controller: 12/24-30
  • Battery Voltage 12/24 V
  • Rated charge current 30A
  • Automatic load disconnect Yes
  • Maximum solar voltage 28V / 55V
  • Self-consumption < 10 mA
  • Load output Manual control + low voltage disconnect +timer
  • Protection: Battery reverse polarity (fuse) Output short circuit Over temperature & Overload protection
  • Shut down after 60 s in case of 130% load
  • Shut down after 5 s in case of 160% load
  • Short circuit: immediate shut down
  • Grounding Common positive
  • Operating temp. range -35 to +60°C (full load)
  • Humidity (non-condensing) Max 95%

Battery

  • Charge voltage ‘absorption’ Factory setting: 14,4V / 28,8V
  • Charge voltage ‘float’ (2) Factory setting: 13,7V / 27,4V
  • Low voltage load disconnect Factory setting: 11,2V / 22,4V
  • Low voltage load reconnect Factory setting: 12,6V / 25,2V

USB

  • Voltage 5V
  • Current 2A (total from 2 outputs)

Enclosure

  • Protection class IP20
  • Terminal size 6 mm² / AWG10
  • Weight 0,15kg
  • Dimensions (h x w x d) 96 x 169 x 36 mm

STANDARDS

  • Safety EN60335-1, IEC 62109-1
  • EMC EN 61000-6-1, EN 61000-6-3, ISO 7637-2

1) For 12V use 36 cell solar panels , For 24V use 72 cell solar panels or 2x 36 cell in series

2) The controller switches to the lower float voltage level 2 hours after the absorption voltage has been reached. Whenever the battery voltage becomes lower than 13V, a new charge cycle is triggered.

Data Sheet

Manual

Weight0.3 kg
Dimensions10 × 17 × 4 cm
Manufacturer

Victron Energy

Reviews

There are no reviews yet.

Be the first to review “Victron Bluesolar PWM Charge Controller 12/24v 30A LCD Screen & USB Ports”