Victron Energy Phoenix Inverter 12/1200 230V


High quality pure sine wave inverter by Victron Energy

14 in stock

EAN: 8719076041559 SKU: 1193 Category:

VE.Direct communication port
The VE.Direct port can be connected to:
• A computer (VE.Direct to USB interface cable needed)
• Apple and Android smartphones, tablets, MacBook’s and other devices
(VE.Direct Bluetooth Smart dongle needed)

Fully configurable:
• Low battery voltage alarm trip and reset levels
• Low battery voltage cut-off and restart levels
• Dynamic cut-off: load dependent cut-off level
• Output voltage 210 – 245V
• Frequency 50 Hz or 60 Hz
• ECO mode on/off and ECO mode sense level

• In- and output voltage, % load and alarms

Proven reliability

  • The full bridge plus toroidal transformer topology has proven its reliability over many years.
  • The inverters are short circuit proof and protected against overheating, whether due to overload or
    high ambient temperature.

High start-up power

  • Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools.

ECO mode

  • When in ECO mode, the inverter will switch to standby when the load decreases below a preset
    value (min load: 15W). Once in standby the inverter will switch on for a short period (adjustable,
    default: every 2,5 seconds). If the load exceeds a preset level, the inverter will remain on

Remote on/off

  • A remote on/off switch can be connected to a two pole connector, or between battery plus and the
    left hand contact of the two pole connector.

To transfer the load to another AC source: the automatic transfer switch

  • For our low power inverters we recommend our Filax Automatic Transfer Switch. The Filax features
    a very short switchover time (less than 20 milliseconds) so that computers and other electronic
    equipment will continue to operate without disruption.

DC connection with screw terminal

  • No special tools needed for installation

Technical Specification

  • 12 Volt
  • Cont. power at 25°C (1) 1200VA
  • Cont. power at 25°C / 40°C 1000 / 850W
  • Peak power 2200W
  • Output AC voltage / frequency (adjustable) 230VAC or 120VAC +/- 3% 50Hz or 60Hz +/- 0,1%
  • Input voltage range 9,2 – 17V
  • DC low shut down (adjustable) 9,3V
  • Dynamic (load dependent) DC low shut down (fully configurable)
  • DC low restart and alarm (adjustable) 10,9 V
  • Battery charged detect (adjustable) 14,0V
  • Max. efficiency 91%
  • Zero-load power 6,5W
  • Default zero-load power in ECO mode (default retry interval: 2,5 s, adjustable) 1
  • ECO mode stop and start power setting Adjustable
  • Protection (2) a – f
  • Operating temperature range -40 to +65°C (fan assisted cooling) Derate 1,25% per °C above 40°C
  • Humidity (non-condensing) max 95%


  • Material & Colour Steel chassis and plastic cover (blue Ral 5012)
  • Battery-connection Screw terminals
  • Maximum cable cross-section 35 mm2 / AWG 2
  • Standard AC outlets UK (BS 1363)
  • Protection category IP 21
  • Weight 7.4kg
  • Dimensions (hxwxd, mm) 117 x 232 x 362


  • Remote on-off Yes
  • Automatic transfer switch Filax


  • Safety EN-IEC 60335-1 / EN-IEC 62109-1
  • EMC EN 55014-1 / EN 55014-2 / IEC 61000-6-1 / IEC 61000-6-2 / IEC 61000-6-3
  • Automotive Directive ECE R10-4

1) Nonlinear load, crest factor 3:1
2) Protection key:
a) output short circuit
b) overload
c) battery voltage too high
d) battery voltage too low
e) temperature too high
f) DC ripple too high

CE Certificates

Data Sheet


Weight7.5 kg


There are no reviews yet.

Be the first to review “Victron Energy Phoenix Inverter 12/1200 230V”