EpEver Waterproof Charge Controller

£19.99£25.49

Premium quality, waterproof PWM solar charge controller. Ideal for extreme environments. IP67 – suitable for outdoor and marine use

Clear
EAN: N/A SKU: EpEver Waterproof Charge Controller Category:

Premium quality, waterproof PWM solar charge controller, from the popular EP Solar range. Ideal for extreme environments. IP67, suitable for outdoor and marine use.

  • Electronic protection; overcharging, over discharging, overload, short-circuit and reverse protection of solar module.
  • High-efficiency digital PWM charging, helps to protect battery lifetime.
  • Load power output can be configured to automatically recognise day and night, therefore can automatically turn on solar powered lighting at dusk.
  • Battery LED indicator status.
  • Built in temperature sensor included.
  • LED Indicator Status as below:

Manual load output control, via small button. Alternatively, hold button for five seconds to browse through automatic load output switching options.

Technical specification

10A

  • Nominal system voltage 12/24 volt DC, auto switching
  • Maximum PV input voltage 50V
  • Rated current 10A or 20A options
  • Equalise voltage 14.8V (12v); 29.6v (24v)
  • Boost voltage – 14.4V (12v); 28.8v (24v)
  • Float voltage – 13.7V (12v); 27.4v (24v)
  • Load output, low voltage re-connect voltage – 12.6V (12v); 25.2v (24v) – this is the voltage that load output starts to operate again should there be too much discharge from the battery
  • Load output, low voltage disconnect voltage – 11.2V (12v); 22.4v (24v)
  • Self-consumption 12V:<4.58ma 24v:=”” 6=”” 01ma=”” br=””>working temperature, -35 to +55 deg C
    Enclosure IP67
  • Overall dimensions – 108.5 x 75 x 25.6mm
  • Net weight 10A – 410g

20A

  • Nominal system voltage 12/24 volt DC, auto switching
  • Maximum PV input voltage 50V
  • Rated current 10A or 20A options
  • Equalise voltage 14.8V (12v); 29.6v (24v)
  • Boost voltage – 14.4V (12v); 28.8v (24v)
  • Float voltage – 13.7V (12v); 27.4v (24v)
  • Load output, low voltage re-connect voltage – 12.6V (12v); 25.2v (24v) – this is the voltage that load output
  • tarts to operate again should there be too much discharge from the battery
  • Load output, low voltage disconnect voltage – 11.2V (12v); 22.4v (24v)
  • Self-consumption 12V:<4.58ma 24v:=”” 6=”” 01ma=”” br=””>working temperature, -35 to +55 deg C
    Enclosure IP67
  • Overall dimensions – 108.5 x 75 x 25.6mm
Weight0.435 kg
Manufacturer

Reviews

There are no reviews yet.

Be the first to review “EpEver Waterproof Charge Controller”

You may also like…